| ADHESIVES |
| BATTERIES |
| CCTV |
| CYCLING |
| DECORATING |
| ELECTRICAL |
| FASTENERS |
| FILLERS |
| GARDENING |
| HAND TOOLS |
| KEY CUTTING |
| LOCKS |
| MOTORING |
| NAILS |
| NUTS AND BOLTS |
| PAINTS |
| PLUMBING |
| POWER TOOLS |
| SIGNS |
| VACUUM |
PRODUCTS |
Floor Shine Rustins floor shines are specially formulated for use on flooring. Laminated Floor Shine is for use on laminated floors, whilst Multi-Purpose Floor Shine can be used on wood, cork, vinyl and lino flooring. Low odour, easy application and quick-drying. Leaves a brilliant shine without buffing. Drying time 10-20 minutes. Leave for 24 hours before re-coating. Wash equipment in water. |
Available in 1LTR
|
|||||||
 |
QUICK-DRYING ACRYLIC FLOOR GLOSS & SATIN Non-toxic, quick drying, low odour, completely clear and non-yellowing. Resistant to water, alcohol, white spirit and similar solvents. Very hard wearing. Touch dry in 20 minutes and re-coatable in 2 hours. Can be applied to wood, cork, MDF, concrete and unsealed terracotta and quarry tiles. Available in Gloss and Satin finish. Clean brushes in water.
|
Available in GLOSS 1LTR 2.5LTR 5LTR SATIN 1LTR 2.5LTR 5LTR
|
|||||||
 |
QUICK-DRYING MULTI-PURPOSE FLOOR FINISH Apply on laminate, pre-coated veneered and wood floors, where minimum preparation is required. Quick drying, low odour, completely clear and non-yellowing. Very hard wearing. Touch dry in 20 minutes and re-coatable in 2 hours. Available in Satin finish. Clean brushes in water. |
1LTR
2.5LTR |
|||||||
 |
FLOOR OIL A mixture of natural vegetable oils and resins which improves the colour of bare wood. Wood tone will become richer when oil is applied. Allow 4-8 hours between coats, depending on temperature and humidity. Minimum of 3 coats recommended. Can be applied to all types of interior wooden floors, including parquet, woodblock and floorboards. |
1LTR
5LTR
|
|||||||
 |
Floor Shine Rustins floor shines are specially formulated for use on flooring. Laminated Floor Shine is for use on laminated floors, whilst Multi-Purpose Floor Shine can be used on wood, cork, vinyl and lino flooring. Low odour, easy application and quick-drying. Leaves a brilliant shine without buffing. Drying time 10-20 minutes. Leave for 24 hours before re-coating. Wash equipment in water. |
1LTR |
|||||||
 |
Plastic Coating A two-part cold cure lacquer with excellent adhesion and durability. Almost colourless and will not craze or yellow on ageing. Resistant to scratching, abrasion, most solvents, weak acids and alkalis. Can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Re-coatable after 1-11/2 hours, floor can be used 2 hours after last coat has been applied. Available in Gloss and Satin finish. |
||||||||
 |
Hardener only - For use with Plastic Floor Coating |
63ml
250ml |
|||||||
 |
Plastic Coating Thinners |
250ml
500ml |
|||||||
 |
POLYURETHANE FLOOR SEALER A heavy bodied, pale coloured, solvent based polyurethane which gives a tough and durable finish. Resistant to water, alcohol, white spirit and similar solvents. Drying time is 4-6 hours. Can be applied to wood, cork, MDF and old concrete floors. Can be applied to already coated flooring without sanding as long as the surface is clean and free from wax. Available in Gloss and Satin finish. |
Gloss finish available in 1LTR 2.5LTR 5LTR Satin finish 1LTR 2.5LTR 5LTR |